Talking about defoamers is always a headache, often inseparable from the discussion of "critical compatibility". Therefore, Tiggo Additive brings high-performance defoamer Tech-365W, which achieves multi-dimensional defoaming throughout the entire process through hydrophobic particle synergy and ultrafine emulsification technology

1. Regarding critical compatibility
     The critical compatibility of defoamers refers to their ability to achieve optimal defoaming performance while avoiding negative side effects such as turbidity, shrinkage, fish eyes, etc. They are neither excessively compatible nor excessively incompatible. There are many complex and ever-changing influencing factors involved in this, making it difficult for "defoaming" to make a decision

     From an application perspective, whether a specific polysiloxane is used as a stabilizer or defoamer depends on its compatibility and solubility in liquid media. Only those polysiloxanes that are incompatible and insoluble in the medium can exert defoaming effects

     From a molecular structure perspective, the core structure of organosilicon defoamers is polydimethylsiloxane (PDMS) main chain, with methyl (CH3) groups and modified groups as side chains. The main controlling factors are molecular weight, chain length, and modified segments
     Polysiloxanes with different molecular weights in the same system have different performances. For example, in a specific structure, products with low molecular weights may act as foam stabilizers, while homologues with high molecular weights can play a defoaming role due to sufficient incompatibility, and products with higher molecular weights (such as hammering agents) are completely incompatible

     For the same defoamer, different polar systems have different compatibility and effects (as shown in the figure). For example, water-based defoamers with specific structures can provide a smooth surface in solvent based systems

2. What exactly does defoaming eliminate?
     Normal bubbles: After forming in the liquid phase, bubbles are driven upward by buoyancy, and their rising rate (v) is proportional to the square of the bubble radius (r ²) and inversely proportional to the viscosity of the liquid phase (η)
     When bubbles reach the gas-liquid interface of the slurry, the bubble film undergoes continuous drainage under the synergistic action of gravity and capillary action, resulting in a nonlinear attenuation of the film wall thickness. Under normal circumstances, when the bubble film thickness drops to about 10 nanometers, the liquid film will rupture. What exactly causes stable bubbles?
     Surfactant molecules are composed of hydrophilic and hydrophobic groups. When excessive surface activity adsorbs onto the bubble liquid film, the hydrophobic group faces the air and the hydrophilic group extends into the water, forming a tightly arranged bilayer film at the gas-liquid interface. This film repairs the thickness of the liquid film and forms a stable bubble. Specifically, it is manifested as: a decrease in surfactant concentration in the thinning area → an increase in local surface tension → migration of liquid and surfactants from the surrounding high concentration area to the thinning area (Marangoni effect), repairing the thickness of the liquid film


     Uniform substances do not undergo stable foaming, and defoaming essentially means "breaking the membrane structure". Its main method is to reduce the Gibbs elasticity of the bubble membrane (the ability of the liquid film to resist deformation) E=2A · d γ/da

3. Multi dimensional instantaneous defoaming 
     Defoamery and compatibility are not completely opposite. "Multidimensional defoaming" is an important way to improve the effectiveness of defoaming, and it is also an excellent solution for defoaming in the current industry. It can achieve stable and unified defoaming effects under different process conditions and different addition amounts. Taking Tech-365W defoamer as an example, this product has multiple defoaming dimensions for pulp and wet film:

①  Hydrophobic particles - SiO2   
     The "hydrophobic particle SiO2" introduced in the Tech-365W water-based defoamer, polysiloxane and hydrophobic particles play a synergistic effect, making the foam unstable by reducing the cohesion, thus breaking the foam. This defoamer is particularly suitable for eliminating the foam stabilization phenomenon caused by excessive surfactants such as dispersants, emulsifiers, etc

②  Ultra fine emulsification technology
     The Tiggo Tech-365W adopts ultrafine emulsification technology, which means a uniform and unified defoaming experience. It has significant dispersion/diffusion properties when used, and the small particle size gives the defoamer stronger Brownian motion ability, allowing it to quickly migrate to the gas-liquid interface, shorten the bubble breaking response time, and achieve significant instantaneous bubble breaking effect

Competitor (left), Taiga Additive Tech-365W (right)
Comparison of diffusion properties when dropped into water

③  Ultra wide positive entry coefficient
     The "multidimensional" defoaming of Tech-365W can maintain a positive entry coefficient (E>0) for Gibbs film at all times, whether in different system slurries such as acrylic acid and polyurethane, or during the polarity change process of coating drying. This means that the entire process can play a defoaming role, and this characteristic also improves its instantaneous and continuous defoaming in flash dry coatings and thick coating. The specific process of action is mainly divided into two steps :

Construction phase (as shown in Figure A) :
When the slurry is mixed with air to form bubbles, the Tech-365W uniform ultrafine emulsified particles quickly penetrate into the bilayer of the bubble membrane, disrupting the stability of the liquid film, reducing microbubbles and increasing bubbles, and promoting rapid defoaming;

Drying stage (as shown in Figure B) :
The hydrophobic particles of Tech-365W defoamer, in conjunction with ultrafine emulsified particles, quickly enter the bilayer of bubbles, adsorb excess foam stabilizing substances, reduce the Gibbs elasticity of bubbles, and rapidly break bubbles

4. Control of foam inhibition
Thanks to ultrafine emulsification technology, Tech-365W exhibits excellent anti foaming effect in liquid phase, without affecting glossiness and transparency after dry film. Compared to conventional products on the market, Tech-365W exhibits better compatibility in various systems, significantly reducing the risk of shrinkage and haze, and having minimal impact on coating gloss. Safe and environmentally friendly, with no VOC emissions

Competitor (left), Taige Additive Tech-365W (right)
Comparative testing of water compatibility

5. Instantaneous defoaming performance
     We conducted parallel tests in water-based acrylic acid system, water-based epoxy system and water-based hydroxyacrylic acid two-component system, compared with the same type of defoamer on the market (the added amount is 0.2%), observed the foam height immediately after the shaker vibrated for 25 min, and recorded the instant defoaming effect ; Water based acrylic acid system

Competitor                  Taiga Additive Tech-365W

Water based hydroxy acrylic acid two-component system

Competitor                  Taiga Additive Tech-365W

Water based epoxy system

Competitor                  Taiga Additive Tech-365W

3.  Summary
     Tech-365W's multidimensional defoaming solution is a leading solution in the industry, with an ultra wide positive entry coefficient that ensures defoaming throughout the entire process while also having good instantaneous defoaming performance. It avoids the impact of dryness caused by temperature changes on defoaming performance and greatly reduces the occurrence of shrinkage caused by excessive use of traditional defoamers
     Tech-365W has excellent defoaming and instantaneous bubble breaking performance, suitable for clear and colored paint formulations, and is suitable for airless spraying and spray coating. Especially suitable for fields such as high-end coatings, high-end inks, and polymer synthesis that require strict surface integrity